Vantage-Aire Specialty Air Conditioning Units

For Specialized Requirements or Climate Conditions

Vantage-Air Environmental Control Units (ECU) are vertical packaged air cooled machines designed for unique industrial and commercial air conditioning requirements.

The E-Tech air conditioner is an energy and space saving unit designed to offer maximum indoor comfort without using outside ground space or indoor floor space. These units can be easily mounted on an outside wall. Counter-flow units can be mounted so that the supply opening is at or under floor level. Factory or field installed accessories can be used to meet specific requirements. These air conditioning units are special order products, often based on exacting engineering specifications, air flow requirements and climate ranges.

Standard or Counter-flow Units

Vantage-Air ECU air cooled units are available in standard top-flow configuration (with supply air on the top and return air on the bottom) or in counter-flow configuration (with supply air on the bottom and return air on the top).

Top-flow Units

Vantage-Aire 7.5 and 10-ton environmental control units (ECU's) assure reliable air conditioning for control rooms, load centers, computer rooms, equipment rooms and telecommunications buildings where high internal heat loads require cooling all year long.

Lots of Equipment, Little Space - No Problem

Run out of wall room? No extra floor space for a large air conditioning unit? Vantage-Aire ECU's are the solution. The Vantage-Aire ECU mounts on the outside of the room, or to the outside wall, without disturbing equipment or using valuable floor space.

Rugged and Reliable- E-Tech ECU Features Include:

• Durable 16 gauge steel cabinet
• Poly-enamel coated cabinet
• Copper tube, aluminum fin evaporator and condenser coils
• Dual reciprocating or scroll compressors with independent refrigeration circuits
• Compressor start-up time delay
• Low ambient refrigerant controls
• Thorough factory testing before shipment

Installation is Quick and Easy

E-Tech 7.5 and 10-ton units are wall mounted units with cut outs in place for intake and return air. The units will fit against the wall, quickly mount in place and be ready to run - thus reducing or eliminating any unit down time.

Fast, Easy On-Site Service or Repair

All maintenance and service access is from the front panel of the unit. All components are easy to reach, and parts replacement can be quickly handled using standard replacement parts, minimizing down time.

Options to Fit Special Requirements

AERS units can be manufactured to fit many specific air conditioning requirements. We offer many options:

• 316 stainless steel or painted aluminum cabinet
• Hot gas bypass
• Factory installed economizer for optional ventilation
• Electric resistance heat
• Bottom brackets
• Phenolic coated coil
• Thermostats and controls for redundant systems and monitoring
• For extreme climates - Desert Duty or Cold Climate Kit.

Counter-flow Units

Counter-flow Air Conditioning Units offer unique benefits for applications requiring a low supply air outlet. For sensitive equipment such as MRI units, UPS rooms, computer rooms, emergency communications buildings or electronic equipment shelters, Vantage-Aire ECU provide optimal cooling capability.

Wall Mounted Units Offer Space Saving Design

Easily mounted to the outside wall of the building, counter-flow ECU 3, 4 and 5 Ton units do not require valuable indoor floor space. With the supply air opening at or under floor level, air circulation in a counter-flow pattern diffuses conditioned air to maintain a stable interior environment. Factory or field installed accessories can be added to meet special requirements.

Rugged Construction for Reliable Operations

• Baked on neutral beige finish over galvanneal steel cabinet.
• Copper tube, aluminum fin evaporator and condenser coils.
• Compressor located on protected isolated vented bottom shelf.
• Built-in full length mounting flanges and sloped top to minimize water leakage.
• Dual condensate drains with internal traps.
• Two rain water drains from condenser section to unit's base.
• Factory installed circuit breaker on all 208/230V units.
• Remote Alarm capability - dry contacts can be used for remote alarm or notification
• upon air conditioner lockout.
• Time delay/anti-short cycle timer.
• Low ambient control.
• High pressure switch and low pressure switch.
• Lock-out relay.
• Thorough factory testing before shipment.

Easy to Install and Service

E-Tech ECU units are wall mount units with cutouts in place for air circulation. Front panel allows easy access to components for service and maintenance. All components are easy to see and reach, and all comply with NEC clearance codes on redundant systems.

Options to Fit Special Requirements

• Stainless steel cabinet.
• Factory installed economizer.
• Factory installed heaters on discharge side of evaporator coil.
• Timed low pressure by-pass for start-up of A/C below 20'F and down to 0-F on
• non-economizer units.
• Factory installed circuit breaker option for 460V units.
• Thermostats and controls for redundant systems and monitoring.
• Special Environment Kits - Desert Duty Kit, Coastal Kit, Dehumidification Kit.

Need Custom Units - Not a Problem

AERS has the engineering and manufacturing capabilities to design, manufacture and deliver units to meet specified requirements and larger sizes of air conditioners. Call us at: 770-734-9696 (or send us an email) for further information or to discuss a specific air conditioning application.